Carpet installation is a service your carpet retailer provides for a fee that is additional to the cost of the carpet. Having your carpet-installed right is critical: proper installation insures that the carpet will look good and deliver the best performance.

Here are carpet installation pointers:
Installation: A quality carpet installation is critical to the performance of your carpet.  When having your carpet installed, the Carpet and Rug Institute advises obtaining the services of an installation contractor who adheres to the Standard for Installation of Commercial Carpet, for all aspects of the installation.

Before Installation: Have a clear understanding of the services the retailer will provide and be aware of those that you must handle. For example, there may be an additional charge to move your furniture. Discuss with the retailer who will remove the existing carpet and cushion and be responsible for disposal. Placement of seams is important. Ask that seams be placed in less visible areas. Request that the installer follow the instructions from the carpet manufacturer and/or those set forth in the Standard for Installation of Residential Carpet, accepted by the industry.  A professional installer can make most seams virtually invisible, although some carpets seam up better than others.

Before the installers arrive, be sure to have your room cleaned out and all your remodeling done.  When Carpet is Delivered: Check its texture, color, and style; make sure there are no visible defects before installation.   Among other things, it requires for proper installation that carpet must be power-stretched to minimize wrinkling and rippling. Seam edges must be sealed with appropriate adhesive to prevent delamination and edge ravel.   Buying your carpet from an authorized “Seal of Approval” retailer will ensure a professional installation.

After Installation: Vacuum your carpet to remove loose fibers. You may notice a slight new carpet smell, which should dissipate quickly. Ventilate the area for 48 to 72 hours. If you are unusually sensitive to odors or allergy-prone, you may want to avoid the installation area during this period. If you have any questions about this, contact your retailer.

In the months following installation, you may notice these characteristics:

SHEDDING—the shedding of loose fibers is normal and should subside with regular vacuuming.

SPROUTING—if a single tuft extends beyond the carpet’s surface, simply clip it off. Do not pull it out.
PILE REVERSAL OR SHADING—a color change that seems to occur in various parts of the carpet, caused by light being reflected in different ways, as pile fibers are bend in different directions. This is not a defect but a characteristic of plush carpet.

Common sense recommendations for installing new carpet:
Install a carpet with CRI’s Indoor air Quality Carpet Testing Program label, indicating that the product type has been tested and meets the low TVOC emissions criteria.

When the carpet is to be glued down (not usually in residential applications), ask the installer to use an adhesive displaying the CRI’s Indoor Air Quality Adhesive Testing Program label, indicating that it has been tested and meets the low TVOC emissions criteria.

Ventilate with fresh air (open windows, operate a fan, and/or run the fan of the heat/air system continuously) during the removal of the old carpet and the installation of the new carpet, and for 48 to 72 hours after installation.
In general, follow the same common sense ventilation precautions used when painting, wallpapering, or renovating any area of the home.